The Most Popular Dead-Ending of Round ADSS Fibre Optic Cables Products Today

banner-ABC

ACADSS anchoring clamp

The Telenco anchoring clamps are designed for a fast, easy and reliable dead-ending of fibre optic cables on access networks with spans up to 90m.

A pair of wedges grips the cable automatically within the conical body. The installation does not require any specific tools

and the operating time is drastically reduced.

图片       图片12

Compact models with 165 mm wedges                                                Max. tensile strength 600 daN(*)

Compact models with 235 mm wedges                                               Max. tensile strength 500 daN(*)
1234                           图片123
                      Double dead-end                                                                            Single dead-end
Instructions for installation
Attach the clamp to the pole bracket using its flexible bail.
Place the clamp body over the cable with the wedges in their back position.
Push on the wedges by hand to initiate the gripping onto the cable.
Check the correct positioning of the cable between the wedges.
When the cable is brought to its installation load at the end pole, the wedges move further into the clamp body.
When installing a double dead-end leave some extra length of cable between the two clamps.

Post time: May-13-2022