Suspension clamp, especially for electrical overhead line, and support using such a clamp

Suspension clamp, especially for electrical overhead line, and support using such a clamp
The clamp comprises an upper section  for connecting to a support, a lower section  with a cradle for the cable,

and an aperture  for inserting it. The clamp also incorporates a bracket with a locking system  for closing the

aperture and retaining the cable inside it. The bracket is hinged to the lower section of the clamp and pivots about

a lengthwise axis, and its free edge has a thrust foot which makes contact with the upper section of the clamp when

closed. The bracket is held in its closed position by a locking screw  which engages with a threaded hole in the

clamp’s upper section.

The quickly installed suspension clamp is fast to install and is convenient to disassemble. For different installation

environments, various installation methods can be adopted. In addition, the two half-shells have the same structure,

thereby facilitating production and improving.

PT.1

Item No.       Cross section(mm²)       Breaking load       
YJPT25 2×16-4×25

8 KN

YJPT50 4×25-4×50

8 KN

YJPT95 4×70-4×95

10 KN


Post time: Dec-13-2021