Three advantages of Insulation Piercing Connector

Insulation Piercing Connector is mainly composed of insulation shell, puncture blade,waterproof rubber pad

and torque bolt. When making cable branch connections, insert the branch cable into the branch cap and

determine the position of the main line branch,then use a socket wrench to tighten the torque nut on the clip.

Gradually close, and at the same time, the arc-shaped sealing pad wrapped around the piercing blade gradually

adheres to the cable insulation layer, and the piercing blade also begins to pierce the cable insulation layer and

the metal conductor. When the sealing degree of the sealing gasket and insulating grease and the contact between

the piercing blade and the metal body achieve the best effect, the torque nut will automatically fall off. At this

time, the installation is completed and the sealing and electrical effect of the contact point is the best.

 

Three Advantages

Easy installation: The cable branch can be made without stripping the insulation of the cable, and the joint is

completely insulated. There is no need to cut off the main cable, and branches can be made at any position of

the cable. Easy and reliable installation, only need to use a socket wrench,it can be installed live.

Safe to use: The joint is resistant to twisting, shockproof, waterproof, flame retardant, anti-galvanic corrosion

and aging, and requires no maintenance. Has been used successfully for over 30 years.

Cost saving: The installation space is extremely small, saving bridge and civil construction costs.For applications

in buildings, there is no need for terminal boxes, distribution boxes, and cable return lines, saving cable investment.

The cost of the cable + piercing clip is lower than other power supply systems, only for plugging

About 40% of the busbar is about 60% of the prefabricated branch cable.

Insulation-piercing-connector(3)


Post time: Feb-14-2022