Factory Cheap Hot Edpm Cold Shrink Tube - Heat Shrink Stress Control Tubing – Yongjiu
Factory Cheap Hot Edpm Cold Shrink Tube - Heat Shrink Stress Control Tubing – Yongjiu Detail:
Application
1.Used for medium voltage termination and straight joint up to 36kV
2.Effectively disperse electrical stress,control partial discharge
Feature
1.Anti-tracking
2.Superior electrical and mechanical properties
3.Shrinkage ratio 3:1
The production of heat shrinkable tubing must first select the appropriate masterbatch, and then select the auxiliary materials to produce specific
The thermal housing casing.
1. The production process of heat shrinkable tube is firstly the production of polyene leech masterbatch: combining various polyene leech base materials with various functional auxiliary materials
The materials are weighed according to the formula ratio and then mixed: the mixed materials are put into a twin-screw extruder and pelletized to produce a polyene leech functional masterbatch.
2. Product molding process: according to the shape of the product, two methods of single screw extrusion and injection molding can be used.
For processing and production:
1. Single-screw extrusion type: mainly used for extrusion molding of heat sink pipes, such as single-wall heat-shrinkable tubes, double-wall heat-shrinkable tubes with glue, and medium thickness
Wall heat sink pipes, high pressure busbar heat sink pipes, high temperature heat shrinkable pipes and other products are all processed and formed by single screw extrusion.
The heat shrinkable tube production line should have the following equipment: extruder (heat sink tube forming), production mold, cooling water tank, tension device, and
Disk device, etc.
2. Injection molding: mainly used for the production of heat-shrinkable special-shaped parts, such as heat sink caps, heat-shrinkable umbrella skirts, heat-shrinkable finger cots and other products
They all use injection molding, and production equipment should include injection molding machines and injection molds.
3. The next important step is radiation cross-linking. The products formed by extrusion or injection molding are still linear molecular structures.
Structure, the product does not yet have the “memory function”, and the performance of temperature resistance, aging resistance, and wear resistance is not enough.
Change the molecular structure of the product. The method we usually use is radiation crosslinking modification: electron accelerator radiation crosslinking, cobalt source radiation
Cross-linking, peroxide chemical cross-linking, at this time the molecule changes from a linear molecular structure to a network structure. Extruded products are passing
After cross-linking, it has a “memory effect”, which greatly enhances the temperature resistance, mechanical properties, and chemical properties of the heat shrinkable tube. The specific table
Now the heat sink tube has changed from the state of tolerance to incompatible, aging resistance, abrasion resistance, and chemical corrosion resistance.
4. Expansion molding: The product modified by radiation crosslinking already has a “shape memory effect”, and it has a high
Non-melting performance under temperature. After heating at high temperature, vacuum blowing and cooling, it becomes the finished heat shrinkable tube, and then according to the tube
The actual situation of the finished product packaging and closing can also be cut and printed according to customer needs. Neutral normal packaging is also available.
Performance
Test | Test Method | Requirement |
Operating temperature | UL 224 | -50 to+125 ℃ |
Tensile strength | ASTM D 2671 | ≥14 Mpa |
Elongation at break | ASTM D 2671 | >400% |
Elongation at break after heat aging | ASTM D 2671 158℃/168hrs | ≥300% |
Longitudinal shrinkage | UL 224 | 0±5% |
Partial wall rate | ASTM D 2671 | <30% |
Flame retardancy | VW-1 | Pass |
Volume resistivity | IEC 93 | >1014Ω.m |
Copper stability | UL224 | Pass |
Type |
Application Diameter Range(mm) |
Expanded(mm) |
Recovered(mm) |
|
D(min) | d(max) | W(min) | ||
YRSG10-26/10 | 12-18 | 26 | 10 | 1.5 |
YRSG10-34/14 | 14-21 | 34 | 14 | 1.5 |
YRSG10-38/18 | 17-27 | 38 | 18 | 1.5 |
YRSG10-50/20 | 23-39 | 50 | 20 | 1.8 |
YRSG35-50/20 | 23-39 | 50 | 20 | 2 |
YRSG35-65/25 | 28-46 | 65 | 25 | 2 |
YRSG35-70/30 | 33-53 | 70 | 30 | 2 |
Product detail pictures:
Related Product Guide:
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Factory Cheap Hot Edpm Cold Shrink Tube - Heat Shrink Stress Control Tubing – Yongjiu , The product will supply to all over the world, such as: Chile, South Korea, Lithuania, When you are keen on any of our items following you view our product list, please feel free to make contact with us for inquiries. You'll be able to send us emails and get in touch with us for consultation and we shall respond to you as soon as we are able to. If it's convenient, you could find out our address in our web site and come to our enterprise. or additional information of our items by yourself. We're generally ready to build lengthy and steady co-operation relations with any possible shoppers within the associated fields.
By Meredith from Qatar - 2018.06.18 17:25
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Cheryl from Greek - 2018.02.08 16:45