2020 Good Quality Heat Shrinkable Tubing - Heat Shrink Bus-bar Insulation Tubing – Yongjiu
2020 Good Quality Heat Shrinkable Tubing - Heat Shrink Bus-bar Insulation Tubing – Yongjiu Detail:
Application
Used in medium voltage substations up to 36kV to reduce electric clearance and increase insulation between bus-bars
Feature
1.Anti-tracking
2.Excellent corrosion resistance
3.UV resistance and weathering resistance
4.Superior electrical and mechanical properties performance.
The production of heat shrinkable tubing must first select the appropriate masterbatch, and then select the auxiliary materials to produce specific
The thermal housing casing.
1. The production process of heat shrinkable tube is firstly the production of polyene leech masterbatch: combining various polyene leech base materials with various functional auxiliary materials
The materials are weighed according to the formula ratio and then mixed: the mixed materials are put into a twin-screw extruder and pelletized to produce a polyene leech functional masterbatch.
2. Product molding process: according to the shape of the product, two methods of single screw extrusion and injection molding can be used.
For processing and production:
1. Single-screw extrusion type: mainly used for extrusion molding of heat sink pipes, such as single-wall heat-shrinkable tubes, double-wall heat-shrinkable tubes with glue, and medium thickness
Wall heat sink pipes, high pressure busbar heat sink pipes, high temperature heat shrinkable pipes and other products are all processed and formed by single screw extrusion.
The heat shrinkable tube production line should have the following equipment: extruder (heat sink tube forming), production mold, cooling water tank, tension device, and
Disk device, etc.
2. Injection molding: mainly used for the production of heat-shrinkable special-shaped parts, such as heat sink caps, heat-shrinkable umbrella skirts, heat-shrinkable finger cots and other products
They all use injection molding, and production equipment should include injection molding machines and injection molds.
3. The next important step is radiation cross-linking. The products formed by extrusion or injection molding are still linear molecular structures.
Structure, the product does not yet have the “memory function”, and the performance of temperature resistance, aging resistance, and wear resistance is not enough.
Change the molecular structure of the product. The method we usually use is radiation crosslinking modification: electron accelerator radiation crosslinking, cobalt source radiation
Cross-linking, peroxide chemical cross-linking, at this time the molecule changes from a linear molecular structure to a network structure. Extruded products are passing
After cross-linking, it has a “memory effect”, which greatly enhances the temperature resistance, mechanical properties, and chemical properties of the heat shrinkable tube. The specific table
Now the heat sink tube has changed from the state of tolerance to incompatible, aging resistance, abrasion resistance, and chemical corrosion resistance.
4. Expansion molding: The product modified by radiation crosslinking already has a “shape memory effect”, and it has a high
Non-melting performance under temperature. After heating at high temperature, vacuum blowing and cooling, it becomes the finished heat shrinkable tube, and then according to the tube
The actual situation of the finished product packaging and closing can also be cut and printed according to customer needs. Neutral normal packaging is also available.
Performance
Test | Test Method | Requirement |
Tensile strength | ASTM D 2671 | ≥11.8MPa |
Elongation at break | ASTM D 2671 | 700% |
tensile strength after heat aging | ASTM D 2671/120℃,168小h | ≥10MPa |
Elongation at break after heat aging | ASTM D 2671/120℃,168h | ≥500% |
Longitudinal shrinkage | ASTM D 2671 | 0 to-10% |
Electrical strength | IEC 243 | ≥20KV/mm |
Dielectric constant | IEC 250 | 3.0 Max |
Volume resistivity | IEC 93 | 1013Ω.cm |
Flame retardancy (oxygen index) | ASTM 4589 | ≥25 |
Copper corrosive 120 ° C, 168 hours | ASTM D 2671 | Pass |
Low temperature brittleness -40 ° C, 4 hours | ASTM D 2671 | No crack |
Water absorption rate | ISO 62/23℃,14 days | ≤0.5% |
Q:CAN YOU HELP US IMPROT AND EXPORT?
A:We will have a professional team to serve you.
Q:WHAT’S THE CERTIFICATES DO YOU HAVE?
A:We have certificates of ISO,CE, BV,SGS.
Q:WHAT’S YOUR WARRANTY PERIOD?
A:1 year in general.
Q:CAN YOU DO OEM SERVICE?
A:YES,we can.
Q:WHAT YOU LEAD TIME?
A:Our standard models are in stock ,as for big orders ,it take about 15 days.
Q:CAN YOU PROVIDE FREE SAMPLES?
A:Yes,please contact us to know the sample policy.
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for 2020 Good Quality Heat Shrinkable Tubing - Heat Shrink Bus-bar Insulation Tubing – Yongjiu , The product will supply to all over the world, such as: Barcelona, Slovenia, South Korea, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Salome from Nairobi - 2017.06.25 12:48
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Iris from Greenland - 2018.09.21 11:01